RAIN-CLIK™

Sensor:Rain

RAIN-CLIK’S QUICK RESPONSE™ STOPS IRRIGATION THE INSTANT RAIN STARTS TO FALL

Most rain-sensing devices work by accumulating a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. In that “accumulation time”, the system will unnecessarily continue to water. This can look especially bad for conservation-conscious municipalities, businesses, and residences. With built-in Quick Response technology, the Hunter Rain-Clik and Wireless Rain-Clik can command a controller to shut off right when it starts to rain. The Rain-Clik can be mounted on an eave or any flat vertical surface like a wall or fence. A gutter mount is also available that allows for easy installation of the Rain-Clik on the edge of a gutter.

Quick Response™ feature shuts the system off as soon as it starts raining
Maintenance-free design with 10-year battery life for Wireless Rain-Clik
Adjustable vent ring allows for setting of reset delay
Rugged polycarbonate housing and metal extension arm
Rain-Clik includes 7.6 m of 0.5 mm2 (20 AWG) sheathed, two-conductor, UL-approved wire
Wireless unit available with 244 m range from wireless sensor to receiver
Warranty period: 5 years (10 year battery warranty for wireless model)
Compatible with most controllers

Specifications

Wiring: normally closed or normally open
Time to turn off irrigation system: 2 to 5 minutes approx. for Quick Response
Time to reset Quick Response: 4 hours approx. under dry, sunny conditions
Time to reset when fully wet: 3 days approx. under dry, sunny conditions
Switch rating: 24 VAC, 3 A
Freeze sensor shuts system off when temperatures fall below 3˚ C (Rain/Freeze-Clik model)
System operating frequency: 433 MHz
UL listed, FCC approved, suitable for use in Australia, CUL (CSA), CE
Communication range up to 244 m line of sight (Wireless model)
Receiver input power: 24 VAC (from controller)